LINK WiFi Discription

knitting machine lubrication unit 12

Differential pressure transmitter is used to measure differential pressure, over pressure
and vacuum.

Applications:
Monitoring & Control of air pressure of non-aggressive nature. Possible usage areas are:
· Air conditioning system and clean room monitoring
· Building Automation
· Valve and flap valve, Actuators
· Filter, Ventilator and Blower monitoring
· Control of airflows.

Technical Specifications:
Supply Voltage: 230 VAC
Pressure medium Air
Pressure measurement - 0 to 10KPa
Analog output 1 - 0 to 10V (Proportional control output)
Analog output 2 - 0 to 10V (Corresponding to 0-10KPa)
Set point - 0 to 9999 Pa (Range)
Relay on set point - 0 to 9999 Pa (Range)
Relay off set point - 0 to 9999 Pa (Range)
Relay on delay time - 0.1 to 99 seconds.
Relay off delay time - 0.1 to 99 seconds.
Proportional band - 0 to 9999 Pa
Relay type - 1 - NO 2 - NC
Relay contact voltage - 250V/10A.
Display - Red LED display, 6digits

Smart Humidity Controller

this device maintain the humidity of the plant  or industry,

Technical Specifications:

24V AC/DC

0-10V Humidity Reference input voltage from  HT Sensor

0-10V Control O/P

Relay type - NO 2

Smart Temperature Controller

this device maintain the Temperature of the plant  or industry,

Technical Specifications:

24V AC/DC

0-10V Temperature Reference input voltage from  HT Sensor

0-10V Control O/P

Relay type - NO 2

SN 2020

this device maintain the humidity and temperature of the plant  or industry,

Technical Specifications:

24V AC/DC Power Supply

10-Logic I/P

0-10V Humidity & temperature  Reference input voltage from  3 set of HT Sensor

4no - 0-10V Control O/P

Relay type - NO 2

HT Display (Big)

it display the values of humidity and temperature sensors in 4' display

Technical Specifications:

24V AC/DC Power Supply

0-10V Humidity & temperature  Reference input voltage from  3 set of HT Sensor

HT Display (Small)

it display the values of humidity and temperature sensors in 1' display of 4nos

Technical Specifications:

24V AC/DC Power Supply

0-10V Humidity & temperature  Reference input voltage from 3 set of HT Sensor

RS PCB

Read switch PCB for open end spinning machine

pack of 500 quantity

Multi function Counter

This device used display the production counting purpose, it also controllable

Technical Specifications:

230V AC power supply

2 Relay op

2 set of NPN proximity count I/P

auto and External count Reset option available

HT Sensor

HT Sensor, it sense humidity and temperature then generate out put 0-10V for automation controllers

OE Controller

it maintain the TPM and draft of the open ending spinning machine

by sensing the rotor , delivery, feed shaft  speed

control the device by the delivery and feed motor inverter

Technical Specifications:

230V AC power supply

4 Relay op

3 set of NPN proximity count I/P