The ESP-12F WiFi module was developed by Ai-Thinker Technology. The core processor
ESP8266 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU in
a small package with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports
RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA.

  The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete
TCP/IP protocol stack. Users can use this module to add networking capabilities to existing
devices or to build separate network controllers.
The ESP8266 is a high-performance wireless SOC that offers maximum utility at the lowest
cost and unlimited possibilities for embedding WiFi functionality into other systems.

^Features

„ The smallest 802.11b/g/n Wi-Fi SOC module
„ Low power 32-bit CPU, can also serve as the application processor
„ Up to 160MHz clock speed
„ Built-in 10 bit high precision ADC
„ Supports UART/GPIO/IIC/PWM/ADC
„ SMD-22 package for easy welding
„ Integrated Wi-Fi MAC/BB/RF/PA/LNA
„ Support multiple sleep patterns. Deep sleep current as low as 20uA
„ UART baud rate up to 4Mbps
„ Embedded LWIP protocol stack
„ Supports STA/AP/STA + AP operation mode
„ Support Smart Config/AirKiss technology
„ Supports remote firmware upgrade (FOTA)
„ General AT commands can be used quickly
„ Support for the two development, integration of windows, Linux development

Datasheet:

ESP-12F

LINK WiFi Discription

knitting machine lubrication unit 12

Differential pressure transmitter is used to measure differential pressure, over pressure
and vacuum.

Applications:
Monitoring & Control of air pressure of non-aggressive nature. Possible usage areas are:
· Air conditioning system and clean room monitoring
· Building Automation
· Valve and flap valve, Actuators
· Filter, Ventilator and Blower monitoring
· Control of airflows.

Technical Specifications:
Supply Voltage: 230 VAC
Pressure medium Air
Pressure measurement - 0 to 10KPa
Analog output 1 - 0 to 10V (Proportional control output)
Analog output 2 - 0 to 10V (Corresponding to 0-10KPa)
Set point - 0 to 9999 Pa (Range)
Relay on set point - 0 to 9999 Pa (Range)
Relay off set point - 0 to 9999 Pa (Range)
Relay on delay time - 0.1 to 99 seconds.
Relay off delay time - 0.1 to 99 seconds.
Proportional band - 0 to 9999 Pa
Relay type - 1 - NO 2 - NC
Relay contact voltage - 250V/10A.
Display - Red LED display, 6digits

Smart Humidity Controller

this device maintain the humidity of the plant  or industry,

Technical Specifications:

24V AC/DC

0-10V Humidity Reference input voltage from  HT Sensor

0-10V Control O/P

Relay type - NO 2

Smart Temperature Controller

this device maintain the Temperature of the plant  or industry,

Technical Specifications:

24V AC/DC

0-10V Temperature Reference input voltage from  HT Sensor

0-10V Control O/P

Relay type - NO 2

SN 2020

this device maintain the humidity and temperature of the plant  or industry,

Technical Specifications:

24V AC/DC Power Supply

10-Logic I/P

0-10V Humidity & temperature  Reference input voltage from  3 set of HT Sensor

4no - 0-10V Control O/P

Relay type - NO 2

HT Display (Big)

it display the values of humidity and temperature sensors in 4' display

Technical Specifications:

24V AC/DC Power Supply

0-10V Humidity & temperature  Reference input voltage from  3 set of HT Sensor